OBD2, Misfire and Diagnostics, Babcox

OBD II Misfire And Diagnosis

July 30, 2014

When diagnosing misfires, it’s important to use tools that allow you to go beyond a simple code reader that ­displays a P03XX. Even an OEM-level scan tool can’t tell you what the firing voltage is or what the ignition pattern looks like. Nor can it tell you if the ­serial data is accurate or correct.

For that kind of information you need a DVOM or a graphing multimeter/oscilloscope that can look at sensor voltages directly and display primary and secondary ignition patterns. If the vehicle has a distributorless (DIS) or coil-over-plug (COP) ignition system, you’ll also need the appropriate inductive pickups to get a good ignition pattern signal from the coils. Mode $06 data via a scan tool is also helpful on some vehicles for determining which cylinders are misfiring, as well as the­ ­severity of any misfires.
Misfire causes can be categorized into four possible areas:

This scope pattern of a normal secondary ignition event indicates the condition of the spark plug, plug wire, ignition coil, air/fuel mixture and even the amount of air turbulence in the cylinder.

• Ignition System
– Fouled/worn spark plugs
– Shorts, leaks or open ­circuits in secondary ignition wiring/components
– Defective ignition coil(s) (COP or DIS)
– Intermittent ignition ­module/coil driver
– Low system voltage
 
• Mechanical
– Carbon deposits
– Worn valve train/burnt valves
– Loose timing belt or chain/valve timing
– Head gasket failure
– Worn rings, piston mechanical damage
• Air/Fuel System
– Low fuel level/poor fuel quality
– False air/vacuum leaks
– Clogged fuel filter
– Low fuel pressure/volume
– Open or shorted injector coil
– Damaged injector driver
– Injector ground/power supply ­circuit problems
– Clogged injectors
– Stuck (open) EGR valve
– Low system voltage
• False Misfires
– Rough road
– Heavy acceleration when cold
– Loose motor or transmission mounts
– Transmission/torque converter ­mechanical faults

Related Course

Computer Engine Data - Full Course

Computer Engine Data - Full Course

View Course

In this course, Ron Bilyeu takes you through the ins and outs of reading and understanding computer engine data and how to apply that data to real world diagnostics. This course examines various monitoring systems individually to help you achieve a detailed understanding of what that system is reporting.

Read More

Sponsor
AVI © 2024
ASE Accredited