Description
This bundle consists of the following courses:
- AP-9 Meter Usage and Electrical Circuit Testing
- ASE-A6 Test Prep Electrical and Electronic Systems
- ASE-T6 Medium Duty Heavy Duty Electrical and Electronic Systems
- Delphi Training Series: Batter Up with Battery Technology
- Delphi Training Series: Mastering Meters & Advanced Electronics Diagnostics
- LBT-41 Current Ramping
- LBT-73 F.R.E.D. Takes the Bus
- LBT-114 GM Vehicle Anti-Theft Systems
- LBT-133 F.R.E.D. Busses The Body
- LBT-142 GM Smart Charge Systems
- LBT-145 10 Minute Scope Check
- LBT-158 Getting the most from your Solarity Scope
- LBT-164 CAN Data Diagnostics
- LBT-212 Anatomy of a Waveform
- LBT-215 PicoScope Guided Tour
- LBT-217 MTS 5200
- LBT-219 J2534 Reprogramming with Bob Pattengale
- LBT-233 Victory Over Voltage Drops
- LBT-237 FRED Kicks the CAN
- LBT-257 Future Power: Advanced Technologies in Batteries, Starting & Charging Systems
- LBT-269 Wiring Schematics Interpretation
- LBT-270 Parasitic Current Draw
- LBT-293 Mastering the Module Flash by Dave Hobbs
- LBT-294 Diagnosing OEM Vehicle Theft Deterrent Systems
- LBT-313 Lab-scope diagnostics version 3.0
- LBT-323 Electrical Troubleshooting and Schematic Based Diagnostics
- LBT-327 48 Volts and Beyond: HEV Advanced Diagnostic Tips
- LBT-333 Controller Area Network (C.A.N.)
- LBT-342 Reprogramming and flashing
- LBT-344 Euro Wiring Diagrams
- LS-5 In-vehicle battery / starter / alternator diagnostics
- LS-9 Wiring schematics interpretation
- LS-37 Essential skills for electrical diagnosis
- LS-43 Current Probe Diagnostics
Courses
AP-9 Meter Usage and Electrical Circuit Testing with Dave Hobbs
This class provides detailed explanations, applications and practical uses when utilizing your multimeter in everyday situations. Instructor Dave Hobbs presents an array of Fluke meters illustrating intermediate and advanced operations, buttonology, and functionality through hands on exercises.
ASE-A6 Test Prep Electrical and Electronic Systems with Dave Hobbs
Updated to address the most recent ASE task list! Just because you have worked with electrical systems before does not mean you are ready to take the ASE A6 test. […]
ASE-T6 Medium Duty Heavy Duty Electrical and Electronic Systems
The ASE-T6 certification course is a comprehensive presentation by some of the top electrical technicians in the world from Bosch, Midtronics and Delphi. It is designed to train you how […]
Delphi Training Series: Batter Up with Battery Technology
We’ll cover battery technology, proper battery charging and testing, BMS (Battery Management Systems) and those alternator ‘equivalents’ on Hybrid vehicles - DC-DC converters.
Delphi Training Series: Mastering Meters & Advanced Electronics Diagnostics
Veteran Delphi instructor Dave Hobbs provides you with advanced meter functions, an introduction to advanced electronic concepts including current draw testing, intermediate and advanced lab scopes, finding intermittent ground and connection problems and diagnosing EMI/RFI issues.
LBT-41 Current Ramping with Jim Linder
AVI can help every tech in your shop analyze and diagnose most vehicles in 15 minutes or less? Want to know how? This program with the “Injector Guru” Jim Linder […]
LBT-73 F.R.E.D. Takes the Bus with Dave Hobbs
Data-bussing and multiplexing can be complex and aggravating, but F.R.E.D. (Frustrating, Ridiculous, Electronic, Devices) can help solve the mystery behind it. In this course, Dave Hobbs brings his 30+ years […]
LBT-114 GM Vehicle Anti-Theft Systems with Bill Fulton
This course will give you great tips on intermittent problems that drive you crazy and need-to-know information on the pass-key module re-learn procedures without using a scanner.
LBT-133 F.R.E.D. Busses The Body with Dave Hobbs
The body control module (BCM) and CAN technology on GM vehicles is very complex and is central to the control system. Like it or not these systems are here to […]
LBT-142 GM Smart Charge Systems with Dave Hobbs
GM’s regulated voltage control systems changed in 1994 when they began using the BCM and the PCM. Before you try to tackle these newer GM systems you should refresh your […]
LBT-145 10 Minute Scope Check with Bill Fulton
This program shows you what to look for and how to make decisions on weak cylinders. Bill shows you tests with your DSO to pinpoint misfire causes that you can’t do with a scanner. This course also helps end the confusion by giving you scope settings for testing/voltage, time, slopes and trigger source.
LBT-158 Getting the Most out of Your Solarity Scope with Jim Wilson
You paid good money for your Genisys labscope, wouldn’t you like to get the most out of your investment? Jim Wilson knows his diagnostic equipment and in this program he […]
LBT-164 CAN Data Diagnostics with Bill Fulton
Bill covers the new powertrain PIDS and the 40 uniform parameters of information that have made data easier to interpret on domestic and foreign vehicles. He tells you which mode will allow you to test high mileage vehicles and find lazy O2 sensors, which will also help your customers improve gas mileage.
LBT-212 Anatomy of a Waveform with Bill Fulton
In Anatomy of the Waveform, Bill covers the diagnostic value of a secondary ignition waveform on DI, DIS, COP systems and a compression waveform viewed dynamically with the engine running using a DSO and pressure transducer.
LBT-215 PicoScope Guided Tour with John Thornton
In this training program, John Thornton gives a guided tour to use the PicoScope to your fullest potential. Learn about all the features of the PicoScope such as horizontal scale […]
LBT-217 MTS 5200 with Bob Pattengale
Learn to perform tasks like ignition system testing, using the graphing multimeter, and the program also includes some great ‘real world’ case studies.
LBT-219 J2534 Reprogramming with Bob Pattengale
Learn J2534 fundamentals and skills using several different reprogramming tools that can help you make money with Bob Pattengale. Bob wants you to prepare for the inevitable. More than 30% of the cars you are working on for drivability concerns can be likely be fixed with a reflash, meaning no parts are required.
LBT-233 Victory Over Voltage Drops with Dave Hobbs
Victory Over Voltage Drops is your training solution to diagnosing one of the most common intermittent electrical problems within any vehicle's electrical system. Whether it's Powertrain, Chassis or Body systems related – or whether the problem resides in a power, ground or signal circuit - excessive voltage drops can be frustrating to track down.
LBT-237 FRED Kicks the CAN with Dave Hobbs
This video will show you how you can use your volt meter, ohm meter, lab scope and scan tool to diagnose network problems on the vehicles in your shop. Both the latest CAN buses as well as earlier networks on Ford, GM, Toyota, & Chrysler are not only explained, but veteran AVI instructor Dave Hobbs shows you exactly how to get to a diagnostic decision quick with the latest real world training.
LBT-257 Future Power: Advanced Technologies in Batteries, Starting & Charging Systems with Dave Hobbs
Instructor Dave Hobbs covers all the latest information & technology including anti-theft systems.
Modern vehicles rely on communication between computers and modules that operate everything. A properly maintained battery is essential to power these systems. In fact, some batteries are so sensitive to being overcharged one can do damage with their shops battery charger.
LBT-269 Wiring Schematics Interpretation
Get familiarized with all the different symbols used in schematics, not only on American cars but German vehicles as well. Learn how to accurately read a schematic and locate certain systems throughout any vehicle quickly and with confidence. Look over Peter Orlando’s shoulder as he goes over “Common Point” diagnostics, critical thinking and his famous “Three Power Point Process.”
LBT-270 Parasitic Current Draw with Dave Hobbs
In this video, AVI teams up with Delphi instructor and electrical mastermind, Dave Hobbs to bring you the most comprehensive class on parasitic battery drains on the market. Dave will guide you through the entire diagnosis process, step by step and in order to make sure you have confirmed the customer complaint all the way to verifying the repair.
LBT-293 Mastering the Module Flash by Dave Hobbs
Join instructor Dave Hobbs in this training program on mastering the module flash! Dave will cover the J2534 standard for module flashing, how to determine if your customer needs a flash, the tips and tricks for actually flashing a vehicle, and finally how to follow-up a successful flash.
LBT-294 Diagnosing OEM Vehicle Theft Deterrent Systems with Dave Hobbs
You’ll learn about how each of the various systems operate and are incorporated into the normal running scenario of today’s cars, as well as the diagnostics processes you’ll need to know.
LBT-313 Labscope Diagnostics Version 3.0
AVI instructor Bill Fulton updates his labscope diagnostic strategies with new case studies focusing on compression waveforms. Even those technicians who have been using their labscopes for years will acquire new tips and techniques for quicker and more accurate engine diagnostics.
LBT-323 Electrical Troubleshooting and Schematic Based Diagnostics
This HD Broadcast event from Bill Fulton will cover electrical troubleshooting and schematic based diagnostics.
LBT-327 48 Volts and Beyond: HEV Advanced Diagnostic Tips
The P0A0D Prius trouble code is discussed along with High Voltage Interlocks that can cause those codes.
LBT-333 Controller Area Network (C.A.N.) Overview
After attending this course, the student will have a thorough understanding of the two common types of networking systems used on vehicles today and understanding how to diagnose those issues.
LBT-342 Reprogramming and Flashing
This course will cover j2534 programming and OEM programming. Also, the different types of pitfalls you may encounter when going through the reprogramming process.
LBT-344 Euro Wiring Diagrams
This class will help unravel the mysterious format in the EURO DIN wiring diagrams! We will cover tips and techniques to trace that circuit across the many pages that are common in this type of wiring diagram, allowing you to have a road map to get a handle on the problem.
LS-5 In-Vehicle Battery/Starter/Alternator Diagnostics with Dan Cox
ARCHIVED LIVESTREAM – Presented by Dan Cox, Technical Support Manager for Midtronics, Inc. Along with some basic electrical system diagnostics, many of the changes the automotive industry is seeing from […]
LS-9 Wiring Schematics Interpretation
ARCHIVED LIVESTREAM – This is a special Live Stream course because it is going to be live from the AVI Conference in Las Vegas. That’s right we are packing up […]
LS-37 Essential Skills for Electrical Diagnostics
ARCHIVED LIVESTREAM – You’ve taken an electrical class with electron theory and all those ohm’s law formulas, but it left you confused. How will this information really help me fix an […]
LS-43 Current Probe Diagnostics
Interpreting lab scope patterns using your low amp clamp will allow you to quickly pin point your diagnostics when it comes to engine driveability issues. Engine outputs all have something in common; a coil of wire.
