AVI OnDemand

Hybrid / EV Scan Tool Diagnostics
2022-12-14 12:00 - 13:00 (America/New_York) | KS
JOIN US LIVE DECEMBER 14 @ 12:00-1:00 PM ET
FOR THIS PREMIERE LIVE EVENT!

Zoom: Misfire Diagnostic Strategies
2022-11-23 12:00 - 13:00 (America/New_York) | KS
Register for the Zoom meeting here: https://us06web.zoom.us/meeting/register/tZEtcOmpqzMvHdYlmDmvFtH6YNtN_0rmIK2u
Join AVI instructor Andy Tirado while he takes you through a hands-on vehicle based case study on how to diagnose a misfire. Using various tools and technology including scopes, scan tools and mode 6, Andy will give you the roadmap of the techniques to
quickly isolate a misfire. Learn how determine the cause of a misfire being in the ignition, engine or fuel system and fix it right the first time.
Course Objectives:

Where To Start With DTCs and PIDs
Primary and Secondary Waveform Analysis
Using Mode 6 The Right Way
Fuel Injector Pressure Waveform Analysis
The Importance of O2 Sensor Data
AND MORE!veve

CAN FD: What You Need to Know
2022-10-19 12:00 - 13:00 (America/New_York) | KS
Register for this zoom meeting by following this link:
https://us06web.zoom.us/meeting/register/tZIkdOmtrj0oGNATthdnmnH9383xqYU3o3eX
In the first installment of our multi-part series on CAN FD, AVI’s Director of Training Tom Rayk does a quick review of CAN (Controller Area Network) data, and then relates it to the new standard, CAN FD (Flexible Data).
Tom explains how the systems are similar, and then shows how CAN FD is superior when it comes to data communication. Hands-on demonstrations show how to repair the twisted-pair CAN and CAN FD wiring, and how to perform proper resistance testing.
Course Objectives:
Upon completion of this course, the participant will be able to:

Describe What Is CAN and CAN Specifications
Explain What the Differences Between CAN and CAN FD
Understand How to Create Twisted-pair Wiring
Describe the Data Flow Parameters and Speeds of CAN/CAN FD
Explain the Dominant and Recessive Bus Communications
Understand Proper Resistance Testing of CAN/CAN FD

Modern Starting Technology
2022-09-28 12:00 - 13:00 (America/New_York) | KS
JOIN US LIVE SEPTEMBER 28 @ 12:00-1:00 PM ET
FOR THIS PREMIERE LIVE EVENT!
In AVI’s new Modern Starting Technology course, Master Instructor John Barclay introduces this recently emerging, ever evolving technology. Start/Stop is a strategy that will increase fuel economy, as well as reduce exhaust emissions. With Modern Starting Technology, there’s no more fumbling with your keys, and trying to find the lock in the dark. Your vehicle will sense the presence of the key/fob on your person and electronically unlock the door for you. Now just get in the driver’s seat, press the brake pedal while pushing the start/stop button and off you go!
Just as you would imagine, there’s a whole lot going on to bring us this kind of convenience. John breaks it down into easier to understand segments and covers all the important details you’ll need to know to service vehicles equipped with this feature. Some of the topics discussed are:
· The components involved; modules, sensors, radio frequency emitting and receiving hardware, a more robust starter and more.
· Enabling Criteria-only using start/stop when it’s appropriate.
· Using scan data to trouble shoot problem issues.
· Push Button Start Security
· Safety Protocols
· Discrepancies between manufacturers
Click here to register for this live event!

LIVE EVENT: Brake Technology
2022-08-24 12:00 - 13:00 (America/New_York) | KS
JOIN US LIVE AUGUST 24th @ 12:00-1:00 PM ET
FOR THIS PREMIERE LIVE EVENT!

AVI is proud to announce the arrival of our latest release — Brake Technology.
In this class you will learn the latest advancements in brake technology, including electronic braking, hybrid and electric vehicle brake service information. A main reason for these changes is an environmental concern. As the brake’s friction material wears, it has to go somewhere, and that somewhere can eventually be entering our drinking water supply. Older techs will remember when asbestos was a popular friction material. By the year 2025 all new vehicles must come equipped with copper-free brake pads and shoes. Copper had been viewed as an excellent choice due to its squeal resistant properties.
This course will cover all the friction material options available, helping you choose the right one for each application. Tom talks in-depth about the ways automotive engineers are dealing with squealing. He takes us through the most common modern brake problems, like pedal pulsation. He clearly explains just what torque is, proper torquing techniques and how it can affect braking. Various brake bleeding techniques are covered.
To do a proper brake service on a modern vehicle requires using a scan tool. Today’s brake systems are much more complex than yesterday. A case study on a Ford Escape covers the functions of the brake pedal stroke simulator sensor. The instructor discusses a situation with a Ford Fusion with braking power being boosted, using an electric vacuum pump.
Safe and reliable brakes have always been critical to a good driving experience. To be a brake service expert requires expert training. At AVI, your training starts here.

Brake Technology
2022-08-17 12:00 - 13:00 (America/New_York) | KS
JOIN US LIVE AUGUST 17 @ 12:00-1:00 PM ET
FOR THIS PREMIERE LIVE EVENT!

In Cylinder Pressure Diagnostics
2022-07-13 12:00 - 13:30 (America/New_York) | KS
JOIN US LIVE JULY 13th @ 12:00-1:00 PM ET
FOR THIS PREMIERE LIVE EVENT!
We have a new registration process. You will need to buy a free product and the registration form is available at checkout.

AVI Instructor John Barclay will cover using transducers and waveforms to accurately identify and diagnose a variety of cylinder and timing issues.
John will hold a Q&A session at the end of the presentation to answer questions.
*Free registration through July 13th. A
Measuring pressure within specific cylinders is a relatively new form of automotive diagnostic testing, It uses amplified and non-amplified pressure transducers to determine specific cylinder misfires, engine blow-by percentage, restrictions in fuel injectors, valve timing, concerns, and other volumetric efficiency issues. AVI Instructor John Barclay takes a deep look at pressure transducer waveforms, determining cam timing. and how to Use pressure transducers to determine engine mechanical, fuel system, and misfire concerns. Valve train including intake and exhaust issues can all be diagnosed using a pressure transducer and a labscope. This class shows detailed interpretation of wave forms and timing.
Course Objectives:

Understand what a pressure transducer is and how it works
Identify multiple types of pressure transducers
Connecting a pressure transducer to a labscope
Overview of when to use an in cylinder pressure transducer
Comparison of other tests available and problems

Precautions to take with CPT
Using waveforms to diagnose timing and related issues
Using a cranking, Idle and Acceleration check procedure
Detailed scope pattern interpretation
Evaluating use of pressure transducer diagnostic and when this procedure should be considered.

Runtime=63 minutes
Study Hours: 1.5

EV Theory and Operation
2022-06-15 12:00 - 13:00 (America/New_York) | KS
JOIN US LIVE JUNE 15 @ 12:00-1:00 PM ET
FOR THIS PREMIERE LIVE EVENT!

AVI Instructor Tom Rayk will cover essential skills needed to work on EV and Hybrid vehicles.
Tom will hold a Q&A session at the end of the presentation to answer questions.
*Free registration through June 15th. Archived course access granted for users who attend live presentation.

As Electric Vehicles are becoming more and more common, fundamental operational and service procedures are needed by the automotive industry. This course with AVI instructor Tom Rayk covers theory, operation, and essential diagnostic concepts anyone working on hybrid or full electric vehicles must know.
Topics Covered:

Differences between A/C and DC electricity
Importance of correct meter use for safety and diagnostics
Obvious and less than obvious EV safety procedures
Components and circuits for AC to DC or DC to AC in a vehicle
Diagnostic tool overview

Course Objectives
Upon completion of this course, the participant will be able to:

Be able to convey the differences between AC & DC electricity
Identify the differences between AC & DC circuits
Perform a DC voltage drop check
Identify essential components in an EV system
Describe how DC is inverted to 3 phase AC
Perform safe testing of high voltage circuits

6.7 Power Stroke Hands-On Classroom
2022-05-16 08:00 - 12:00 (America/New_York) | Master Auto Training, 7586 Wild Horse Way, Rancho Cucamonga, California, 671434

Electric – Hybrid Training Heads To Los Angeles
2022-05-14 08:00 - 16:00 (America/Los_Angeles) | DRiV Training Facility, 2121 East Paulhan Street, Rancho Dominguez, CA, 90220
LIVE Electric Hybrid Training Comes To Los Angeles

NASTF and TMC's Truck Tool Night
2022-05-12 19:00 - 20:00 (America/New_York) | KS
Join the National Automotive Service Task Force (NASTF) and the American Trucking Associations’ Technology and Maintenance Council (TMC) for Tool Night, a joint webinar demonstrating the features and benefits that various Scan Tool providers offer for heavy duty vehicle diagnostics.

Come hear about the latest offerings from DG Technologies, Diesel Laptops, Noregon, Redline Detection, Snap On, and more! This event will allow the tool providers to demonstrate their capabilities and give you the opportunity to get your questions answered by the experts.

The webinar will be held on the evening of May 12th, 7:00pm ET and is free for all attendees. Click below to register and see the full event details.

Register Here

TUCSON ELECTRIC - HYBRID TRAINING
2022-05-07 08:00 - 16:30 (America/Phoenix) | KS

Santa Fe A/C Classroom-Parts Authority/Parts Plus
2022-05-04 19:30 - 2022-05-05 00:00 (America/Los_Angeles) | KS

Hybrid/EV Workshop - Parts Plus
2022-05-03 17:30 - 21:30, 2022-05-02 17:30 - 21:30 (America/New_York) | IntelliTec Colleges, 5001 Montgomery Blvd NE, Albuquerque, NM, 87109, United States

LAUNCH Scan Tool Navigation and Diagnostics For The Power User
2022-04-21 18:30 - 20:30 (America/New_York) | KS
If you are an experienced user of the Launch family of scan tools, this coaching class is for you! Let’s face it, there is a need to use all tools to their full potential.
This program will cover everything from diagnostic tips to time saving processes and how to use value added accessories that speed up diagnostic flow.
This program is geared to making you the most effective Launch scan tool user you can be.
Topics Covered:

Ensuring Tool is Updated
Mode 6
Mode 10 Codes
OBD Tips
Using The Right Tool Functions for The Best Diagnostic Outcome
Battery Testing
Sending Operational Input to Launch
Scoping With Your Scanner
HDMI Output Ideas
Scan tool Tips Using OEM Websites
Thermal Camera Usage
Bi-directional Controls
Reset Functions
Injector Coding

Please note that this program will change, and items will be added as updates and new information becomes available.

LAUNCH Scope Power User
2022-03-31 18:30 - 20:30 (America/New_York) | KS
This course is intended for those Launch scope users that have moved beyond basic functionality. The Launch Power User will benefit from the advanced diagnostic techniques that the scope has to offer.
Topics Covered:

Scope Terms & What They Mean

Scope Filter Settings

Different Diagnostic Scope Uses

Interpreting Different Waveform Patterns

Using the Automotive Preset Setting

Please note that this program will change, and items will be added as updates and new information becomes available.

LAUNCH Scan Tool Navigation & Diagnostics For The Power User
2022-03-17 18:30 - 20:30, 2022-02-17 18:30 - 20:30, 2022-01-20 18:30 - 20:30 (America/New_York) | KS

Vision KC
2022-03-03 - 2022-03-06 | KS

Hybrid Training Tool - Client Delivery
2022-02-24 - 2022-02-25 | KS

K&M Training & Tradeshow
2022-02-17 - 2022-02-18 | KS

Electric Vehicle Training in Jacksonville, FL
2022-01-29 09:00 - 17:00 (America/New_York) | KS
The Group Training Academy Cutaway Prius will be in Jacksonville, Florida for hands-on Electrical and Hybrid Training!

High Voltage Component Strategies
2022-01-19 12:00 - 13:00 (America/New_York) | KS
JOIN US LIVE DECEMBER 15 @ 12:00-1:00 PM ET
FOR THIS PREMIERE LIVE EVENT!
AVI Instructor John Forro will cover high voltage components.
John will hold a Q&A session at the end of the presentation to answer any questions you have.
*Registration info given upon course enrollment

The course covers the components that make these vehicles unique and delves deep into their operation, their specialized components and effective diagnostic procedures. It also extensively covers the most critical subject of the lessons: safety. This class explains the vehicle’s workings, preparing the vehicle for safe diagnostic interaction, proper personal protective equipment for the technician, and recommended tools.
Topics Covered:

Critical thinking that leads to the proper diagnostic path
Inverter/converter components and their functions
How to test inverter/converter components
High voltage battery pack components and their functions
How to test high voltage battery pack components
Communicate on high voltage battery technology and components
Motor generator testing using labscopes
Important scan tool PIDs & DTC diagnostics

Course Objectives:
Upon completion of this course, participant will be able to:

Define the Steps to Disassemble The Inverter/Converter Assembly
Explain the High Voltage Battery Pack Components
Describe Motor Generator Proper Testing Methods
Understand the Most Important Scan Tool PIDs Related To HV Testing

2022 AVI Conference
2022-01-13 - 2022-01-16 | KS
2022 AVI Conference The AVI Conference will be held January 13 – 16, 2022
at AVI Studios in Fort Myers, Florida.

Diesel, Electrical, Engine Performance, Hybrid, Service Advisor, and Management Training from industry-leading instructors will be featured during the 3-day event.
Stay accommodations at Sanibel Harbor Marriott

Check-In Thursday

Training Friday and Saturday

Excursions on Sunday

REGISTER NOW

Keep Your Cool
2021-12-15 12:00 - 13:00 (America/New_York) | KS
JOIN US LIVE DECEMBER 15 @ 12:00-1:00 PM ET
FOR THIS PREMIERE LIVE EVENT!
AVI Instructor John Forro will cover the latest technology on A/C systems.
John will hold a Q&A session at the end of the presentation to answer any questions you have.
*registration info given upon course enrollment

New A/C Diagnostic Strategies
This course will cover R-1234yf systems, along with advanced procedures and tools for maintenance. Also covered will be A/C system diagnostics using scan tools, pressure gauges, reclaimers/recyclers, leak detection equipment and thermal imaging cameras.
Topics Covered:

A/C System Evolution
R-1234yf and Legacy Refrigerants
Leak Detection Options
A/C Diagnostics Using Thermal Imaging
New Uses for Scan Tools in Basic A/C Diagnostics
Advanced Pressure Gauge Usage
New A/C components such as plastic pressure lines and “line in line”

Course Objectives:
Upon completion of this course, participant will be able to:

Define Methods to Perform Accurate Leak Detection on R-1234yf systems
Explain the Pressure Relationships Between Older and New refrigerants
Describe New A/C Line Styles
Understand New Methods to Replace Schrader Valves

Hybrid Vehicle Training @ AVI Studios
2021-12-11 08:00 - 17:00 (America/New_York) | KS
Electric/Hybrid Hands-On Level 1 and 2 Workshop
Book Hands-on Hybrid Training:
https://aviondemand.com/interactive-mobile-training-workshop/#hybrid-training

Hands-On Hybrid Vehicle Training
2021-12-03 08:00 - 17:00 (America/New_York) | KS
Live On-Site Training In Grayslake, IL.
Book Hands On Training Here:
https://aviondemand.com/interactive-mobile-training-workshop/#hybrid-training

Thanksgiving
2021-11-25 | KS
