News
Online Training
Download Catalogs
Monthly Specials
Service Center
ASE Test Prep
Diagnostics & Driveability
Diesel
Management
Electrical
Hybrid
Archived Webinars
HD Broadcasts
AVI Learning Paths
Automotive Tools
Bosch Training
Shop Resources
First Responders
Live Training
Mobile Workshop
Classroom Training
Training & Research Center
Fleets
Events
Login
Sign Up
Open main menu
News
Online Training
Download Catalogs
Monthly Specials
Service Center
ASE Test Prep
Diagnostics & Driveability
Diesel
Management
Electrical
Hybrid
Archived Webinars
HD Broadcasts
AVI Learning Paths
Automotive Tools
Bosch Training
Shop Resources
First Responders
Live Training
Mobile Workshop
Classroom Training
Training & Research Center
Fleets
Events
Login
Sign Up
Electrical Training
Complete Post Test to Recieve Certificate of Completion
When using an ohm meter on a vehicle's ground circuits make sure __________
*
the meter is connected in series
the meter is at least a 10 M ohm meter
the vehicle's battery is disconnected or ALL the electrical loads are off
the ignition switch is turned on and the circuit is live
When a meter shows OL it means the meter is being damaged.
*
True
False
Common meter measurement abbreviations are:
M for Mega, K for Kilo, and m for Milli
M for milli, K for Kelvin, m for Mega
M for Mega, K for Kilo, and m for Million
M for Mega, K for Kilo, and m for Micron
Technician A says a replacement battery should have the same or higher CCA rating as the original battery. Technician B says a battery's group size depends on the CCA rating of the battery and its post configuration. Who is right?
Technician A only
Technician B only
Both Technician A and B
Neither Technician A nor B
What is the function of the diodes (rectifier assembly) in an alternator?
Regulate electrical system voltage
Regulate charging voltage
Convert Alternating Current (AC) to Direct Current (DC)
Convert Direct Current (DC) to Alternating Current (AC)
What does OL mean on your DVOM?
Open circuit
No Continuity
Out of limits
All of the above
A meter showing 0.50 when set to read K-ohms, this reading is actually___.
0.5 ohms
50 ohms
500 ohms
5000 ohms
Technician A states that the CAN system uses two terminating resistors at the end of the circuit. Technician B states two 120 ohm resistors in parallel are used as the termination point. Who's correct?
Technician A only
Technician B only
Both Technician A and B
Neither Technician A nor B
When testing continuity of a circuit:
the circuit must be live
the circuit must be off
the meter leads are in series with the circuit
the readings will be in millivolts
To test for current flow in a circuit Technician A says to test with a current probe to check the circuit. Technician B states you can use the Multimeter by connecting it parallel to the circuit. Which is correct?
Technician A only
Technician B only
Both Technician A and B
Neither Technician A nor B
Please provide us with your email address in order to receive your test results and certificate of completion
*
Name
*
First
Last
AVI © 2023
FAQ
About
Contact
Terms of Use
(800) 718-7246
Questions? Feedback?
powered by
Olark live chat software