08_Understanding ADAS - AVI OnDemand

Home
Training Offerings
Educators
- Training Offerings
Fleet and Municipality
- AVI Fleet and Municipality
- AVI On Scene
Training Events
- Live Training Events
- Live Broadcasts
News Blog
AVI Store

Cart
Login
Sign Up

Home
Training Offerings
Educators
- Training Offerings
Fleet and Municipality
- AVI Fleet and Municipality
- AVI On Scene
Training Events
- Live Training Events
- Live Broadcasts
News Blog
AVI Store

Cart
Login
Sign Up

Understanding ADAS - 8 Hours

Customer concern – Safety system disabled warning message has been displayed since the windshield was replaced. Technician A says the camera is defective and should be replaced. Technician B recommends inspecting the windshield camera mounting location and review the OE requirements for approved glass. Who is correct?*
- Technician A
- Technician B
- Both technicians
- Neither technician
Customer Concern – The adaptive cruise control is inconsistent following collision repairs. Sometimes the vehicle gets too close to the lead vehicle and they are required to slow the vehicle, but sometimes it works perfect. Also, intermittent emergency message is displayed, when no object is ahead. Technician A recommends inspecting the forward radar mounting points for broken parts. Technician B says the radar will need to be replaced. Who is correct?*
- Technician A
- Technician B
- Both technicians
- Neither technician
A vehicle equipped with blind spot monitor does not properly detect vehicles on the right side, but works fine on the left side. No fault codes are present. What is the most likely cause?*
- Right blind spot module unplugged
- Right blind spot module needs to be programmed
- Incorrect radar module installed
- Radar aiming position is not correct
During a forward facing camera calibration the scan tool displays a failure message. What is the most likely cause?*
- No communication with the camera module
- Damaged rear view mirror
- Target is placed in the wrong location
- Scan tool software needs to be updated
Technician A says a light amount of body filler is allowed when repairing rear bumpers with blind spot radars, as long as the filler does not obstruct the radar. Technician B says you should always consult OE service information when repairing rear bumpers with blind spot radars. Who is correct?*
- Technician A
- Technician B
- Both technicians
- Neither technician
Technician A says a thorough road test should be performed following any ADAS system repairs and best practice is also performing a final vehicle system scan. Technician B says if the calibration is successful and no fault codes are present, the vehicle is ready for delivery. Who is correct?*
- Technician A
- Technician B
- Both technicians
- Neither technician
A vehicle equipped with blind spot radar technology is disabled and a fault code is present for radar mis-match. What is the most likely cause?*
- Fuse to blind spot module is blown
- Incorrectly aimed radars
- The radar modules are not a matched pair
- Radar module needs to be programmed
The scan tool will not communicate with any module on the vehicle. What is the most likely cause?*
- No power at pin 16 of the DLC
- Scan tool software out of date
- Battery is slightly discharged
- Secure gateway module software needs an update
Technician A says ALL windshield camera calibrations require static targets. Technician B says OE service information should be consulted when deciding how to calibrate a windshield camera. As some are static, some are dynamic and some require both. Who is correct?*
- Technician A
- Technician B
- Both technicians
- Neither technician
Customer Concern – Rear parking aid system is not working correctly following collision repair. What is the most likely cause of the concern?*
- Incorrectly refinished bumper cover
- Blind spot calibration not complete
- Missing clips at the bottom of the bumper cover
- Rear ultrasonic sensors were replaced and not registered
Please provide us with your email address in order to receive your test results and certificate of completion.*
Name*
First Last

Please take a moment to fill out the course evaluation below:

Instructor*
Course Evaluation
1. The instructor was knowledgeable.
- 5 - Strongly Agree
- 4 - Agree
- 3 - Unsure
- 2 - Disagree
- 1 - Strongly Disagree
2. The instructor was prepared.
- 5 - Strongly Agree
- 4 - Agree
- 3 - Unsure
- 2 - Disagree
- 1 - Strongly Disagree
3. The instructor was able to communicate complex topics
- 5 - Strongly Agree
- 4 - Agree
- 3 - Unsure
- 2 - Disagree
- 1 - Strongly Disagree
4. The instructor presented clearly and effectively.
- 5 - Strongly Agree
- 4 - Agree
- 3 - Unsure
- 2 - Disagree
- 1 - Strongly Disagree
5. The instructor encouraged participation.
- 5 - Strongly Agree
- 4 - Agree
- 3 - Unsure
- 2 - Disagree
- 1 - Strongly Disagree
6. The instructor answered questions thoroughly.
- 5 - Strongly Agree
- 4 - Agree
- 3 - Unsure
- 2 - Disagree
- 1 - Strongly Disagree
7. The instructor interacted with course participants.
- 5 - Strongly Agree
- 4 - Agree
- 3 - Unsure
- 2 - Disagree
- 1 - Strongly Disagree
8. The course materials were practical and useful.
- 5 - Strongly Agree
- 4 - Agree
- 3 - Unsure
- 2 - Disagree
- 1 - Strongly Disagree
What improvements would you suggest for this course?
Are there any other class topics you would like to see provided?
Please provide us with your email address.
Name
First Last
CAPTCHA

AVI © 2026

FAQ About Contact Terms of Use (800) 718-7246

Questions? Feedback?Olark live chat software